#Stellar wipe issues plus#

Drying can be accelerated by use of a hot air blower (i.e. Rinse thoroughly with clean water and dry completely in air immediately. Difficult rust or corrosion must be tested to determine the exact best conditions for removal. If heavy rust needs to be removed, non-abrasive Scotch Brite™ or similar may be used halfway through the treatment. Coverage is approximately 90 square feet per 22 oz. This should be determined by testing with your product. This is typically 15-30 minutes at room temperature, depending on the grade of stainless steel, hardness, and the condition of the surface.

#Stellar wipe issues plus#

The surface must be soaked or left moist with the CitriSurf 77 Plus solution for a period sufficient to remove all corrosion, free iron and contaminants from the surface. The parts or areas to be cleaned and passivated should be sprayed, immersed or wiped with CitriSurf 77 Plus to completely wet the surfaces, especially in crevices or in areas where any rust or corrosion may have occurred. If thorough cleaning is not possible during use in the field, wipe the surface free of dirt and oils prior to application. However, to assure best results, the parts or areas to be passivated may be cleaned with an appropriate cleaning solution prior to treatment with CitriSurf solution, especially when heavy grease and oils are present.

Application Procedure:ĬitriSurf 77 Plus is an excellent cleaner by itself for many cleaning and passivation processes. CitriSurf 77 Plus is specifically designed to provide a portable, low cost and efficient removal of contaminants and all rust and free iron from the surface of stainless steel, providing the highest chrome oxide levels possible.Ĭitric acid, water, proprietary ingredientsĢ2 oz. CitriSurf 77 Plus is a high quality blend of chemicals formulated for cleaning, rust removal and passivation of stainless steel products It is provided in trigger sprayer bottles for applications where it is desired to spray the product on a local area.